DreamMaker 3D 3.3.6

The stylish and smart 3D printer evolved to be the most reliable and user friendly choice!

Hi Guys,

Below are the links about guiding videos of Overlord on YouTube:

1) Unboxing the Overlord: https://www.youtube.com/watch?v=trqqPcXwB3M
2) Starting up wizard: https://www.youtube.com/watch?v=prZV5xkAC5w
3) Auto Leveling: https://www.youtube.com/watch?v=6nH8dSHQP_E
4) Manual leveling: https://www.youtube.com/watch?v=STSryjBD_ok
5) Apply glue stick: https://www.youtube.com/watch?v=od74l3tjDIw
6) Reload the material: https://www.youtube.com/watch?v=oMilEXvplPg
7) Power Failure: https://www.youtube.com/watch?v=MbWFuXCO0-4
8) Remove broken PLA in the tube: https://www.youtube.com/watch?v=mX0pX4c6DOQ
9) Clean the nozzle: https://www.youtube.com/watch?v=oWODdAn1t40
10) Clean the extruder: https://www.youtube.com/watch?v=0fkU-ByqNIQ
11) Adjust the height of build plate:https://www.youtube.com/watch?v=9ITzVDe9UKg
12) Replace the nozzle: https://www.youtube.com/watch?v=J7UMCZzuqwQ
Last time I check, Cura 2.3 is not friendly for a delta printer, hence the reason why I'm still using Cura 15.04.6. If anyone can make the latest version work with the OverLord I'd be interested to know how :)

Start your 3D printing journey